Відео

Save 4 minutes, skip to 4:20. Fixed that one ground cable, then skip to 16:00 for results. You're welcome.

I have issue my golf mk4 tdi drains batery 20 min after i left locked or not so i do test negative with negative with 1 wire mod bulb and light goes on 😢 can u help me what to do next

The marina is one of my favourite sites. You can pack a lot in if you focus on building up rather than out.

Why so hurried - is he in a race? Slow down! That soldering was crap, get a high power electric iron, fit heat shrink and just take more care.

Taught Me Something ! 😅 I Been Having The Same Problem ! I Even Took My Battery 🔋Back

Just got one today, I was blown away how amazing The IR in a pitch black room it made it look like daylight.

I’m still stuck. What weapon did you use?

Just curious, could I unplug it and plug in a new one, or is it apart of the wiring harness and I'd have to splice in a new one?

I've had a bad experience with bike berry.i spent over 900 on a bike from them and the frame broke after five days with a balanced engine and The wouldn't make it up with a so called Year warranty on the frame so save your money don't buy a frame for an engine with tank made in and a motirplate you will be fucked by them . mine broke into at The plate and under seatpost

Hello im 67 , ihave a schwinn phantom frame n wheels .i want to go with a 4stroke for the first eng. for pullstart ,knees shot .this is knowledgeble videos .i also am interested in generating power to run a battery for lighting . the battery setup mounted under gas tank looks good .the tank sitting there alone looks stupid .i would like to see how you mounted that setup . awesome its getting me motovated .👍

I need to note, the reason the chain come so close to the wheel was because of ANOTHER crack that occurred in the frame (the third crack!!). I mention this in a following video... Bikeberry frames are just not good frames. They're made out of Chinese Pot-Metal. I dare them to prove otherwise with just constant regular riding. You want a good true motorized bike, go Zeda Motorsports or Smolik Performance. Those guys beat the sh*t out of their bikes. Bikeberry just "poopoos" around.

i killed him and got a strange bug where its telling me to kill him, but i already have and well its been stuck like this for the longest and i kinda decapated him so i cant bring him back to life idk what to do

I been trapped by 20 minutes in this mission until I see this video

I searched in my car for a long time and couldn't find that wire. Thanks for the Video all the drawings online showed this connection at the back near the Firewall. Maybe all the old cars.

Tuollaiset DIY liitokset aiheuttavat niitä sähkö ongelmia ja autopaloja! Kaapelikenkä puristetaan oikeankokoisella kaapelikenkäpihdeillä ja ei missään nimessä tinaa liitoksiin (1950-luvulla on ehkä näin vielä tehty)

Nice video. It helped me out :)

Thanks so much for this video because I was considering buying a frame but I'm so glad I saw your video.

Dude these are things all of us bike builders go thru

Been having this problem, my car shuts off and absolutely will not turn back on at red lights or idles. Hopefully this work

Good work Friend.... Thanks

THANKS

I got mine a year ago the remote quit working battery 3v is ok it lights up but don't work . now i have to work the cam off the tripod , before i do a video .

How fast is it, and is it going up, is it fast,

For that bolt you had to replace for the reer sprocket what’s the size of the bolt. I need to replace my bolts as they came loose and 3 got bent from coming out and hitting the frame

Hi, I got these wheels and installed them and about 5 miniutes into my first ride with them the bolts holding the disc brakes and the sprocket on came loose. They were tight I checked. If u have these wheels u will know that the bolts are very skinny and don’t really look durable. But I’m hoping abit more locktite will work. Does anyone have any tips??

hey bud just want you to know that when honing, crosshatch etches are supposed to be made. So it looks like figure 8s No biggie since it seems easy to take apart. I recall that from mechanics class very vividly.

You will go a lot quicker if u take the face plate off carb

Hi what are the mag bikeberry wheels like? I ordered the 10 spoke wheel as I was advised because I always break spokes. I’m hearing mixed opinions about them some people say they are great and they can do anything with them and others say they are terrible?

did philco actually make a color set like that?

is that hose you used for the fuel line expensive?

the heat shrink tubing is a great idea, i use it on cartridge wire clips to insulate them

it would be great if exhausts could have at least a few inches of flexible tubing

what was wrong with the screw that was in there?

that 900 didn't include the motor did it?

Your front brakes are probably fine the brake cable is probably just stretching over time, as they all do. Also someone else mentioned heat wrap for the exhaust, very good idea for keeping heat down, it also keeps the heat in the pipe and helps to atomize the fuel better. Nice bike though, It's always nice to see someone doing maintenance on their bike.

At 1900 that looks shotty

i think you mean the connecting rod, and alot of engines are poorly made

are those kickstands expensive? I 'm going to need one

someone makes a kit that uses a belt instead of a chain they're alot quieter

how much was this kit? i'm very interested in one

I had the same problem with my sandwich sprocket gasket, so I bought a 1.5" hub sprocket works great as it adjusts itself. Around 17 dollars.

I bought a '06 Golf V which has a jumper cable from Battery Negative terminal to Engine it seems. Googling "VW Engine Ground Cable" and there it is. Probably the monkey that was working on that car couldn't figure where the ground connection is gone or loose :(

Not sure of how the bikes doin now a days, but I clean the soot out from my head and piston when I do my maintenance

Josh racing bike

Hello, How can I stream videos from My Cloud Home to Android TV ❓

Will these motors fit on a 29in bikecicles

Just want to say I appreciate this video so much! Helped me diagnose and fix electrical problems today due to the ground wires being gross and corroded! Much appreciated sir!

Even though those rims and others say HEAVY DUTY they will also say in the fine print don't use center pull friction breaks that rub the side of the rim ... they are for disk breaks only. You can get a new single speed 26" Huffy beach cruiser for under $100, then mod and beat the crap out of it. They are made in China now, but what the hell everything you are bolting on a motorized bike comes from China as well. I found a Huffy Nel Lusso for $99 and free shipping. Walmart has them for $154 ~ for that you can pitch it if it should shit the bed beyond repair and get another. My brother motorized a $1000 + mountain bike and I told him he was insane. Just do the Huffy, they are like Bic disposable lighters and likely will outlast your China doll engine anyway.

Hello sir (Project boardem) , I’m buying a 2001 Honda CR-V it says Real-time AWD I’m just wondering is it always on AWD? Or is there a button to press for 2WD? (It’s a audiomatic (PRND12)

A lot of us got shafted by bikeberry